Vivotek IP8151 User Manual page 168

VIVOTEK
deleteallow
deletedeny
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value>
return <return
page>
6.15.1 IP Filtering for ONVIF
Syntax: <product dependent>
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index=<value>][
&return=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<return
page>]
PARAMETER VALUE
type NULL
allow, deny
method addv4
addv6
delv4
delv6
ip <IP address>
index <value>
return <return page>
168 - User's Manual
Remove allowed IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
Remove denied IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position. [start,
end] parameters have higher priority then the [index] parameter.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.
DESCRIPTION
Get IP filter type
Set IP filter type
Add IPv4 address into access list.
Add IPv6 address into access list.
Delete IPv4 address from access list.
Delete IPv6 address from access list.
Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.