Setting Up Security Using Wep - Zoom 5350 User Manual

Wi‑Fi Protected Setup (WPS) button on the router for 5 seconds.
(You do not need to type a security key or passphrase in the Security Key text box
on your Windows machine). The cable modem/router will automatically set up the
computer to connect to the network and apply the network's security settings.
Then click OK on the Connect to a Network dialog box. Skip (e) and (f).
e Enter the Pre-Shared Key that you just wrote down in Step 7.
f
Save your settings.
That's it! Your security setup is now complete!

Setting Up Security Using WEP

If any of your network devices DO NOT support WPA or WPA2, you can use WEP to configure
network security. WEP can be configured two ways: 64-bit and 128-bit. 128-bit WEP provides more
security than 64-bit.
1 Open the Zoom Configuration Manager by typing the following in your Web browser's address
bar: http://192.168.0.1
2 In the Enter Network Password dialog box, type the following User Name and Password in
lower case, then click OK..
User Name: admin
Password: admin
(The User Name and Password entered here are not the same as the User Name and Password
that your Internet service provider may have given you.)
3 Click Wireless on the top menu.
4 Then click Primary Network on the left-side menu.
18