Mac Filtering Page; To Activate The Ip Address Filter; Ip Filtering Menu Option - Zoom 5350 User Manual

To activate the IP address filter:

1
Enter the last byte (the numbers after the last period) of the IP address in Start Address and
End Address.
2
Check the Enable box to the right of the entry to store settings.
3
Click the Apply button to activate the filter rules.
Table 10. IP Filtering Menu Option
Option Description
Start/End Enter the last byte of the IP address. The upper bytes of the IP address are set
Address automatically from the cable modem/router IP address.
To activate the IP address filter, you must also check the Enable box and click
Enable Apply. You can disable this filter while retaining the addresses you entered for
later use.
MAC Filtering
The MAC Filtering page allows you to configure MAC address filters in order to block Internet traffic
to specific network devices on your LAN.
To access the MAC Filtering page:
1
Click Advanced in the menu bar.
2
Then click the MAC Filtering submenu.
Figure 16 shows an example of the menu and Table 11 describes the items you can select.
44