Wep Settings - Zoom 4402 User Manual

Key Index: Set the WEP key to transmit data on your
wireless.
WEP Key 1-4: Only valid when using WEP
WEP Key 1-4:
encryption algorithm. The key must match with
the AP's Key.
Pass Phrase Select [WEP-64bits] or [WEP-128bits] in WEP
encryption field. Position the cursor in this field
and press enter to generate four WEP keys
automatically.
Network Key This field specifies the interval (in seconds)
Rotation Interval
after which a WPA group key is changed.
Enter [0] (zero) to indicate that a periodic key-
change is not required.

WEP Settings

To configure WEP settings, follow the instructions below. You
must select this option if you have devices on your network that
only support WEP. Otherwise we recommend WPS or WPA-2
Auto-Personal. (Devices that only support WEP include older
handheld game consoles, older MAC notebooks, and very old
Windows notebooks.)
1
In the Zoom Configuration software, go to the Advanced:
Wireless Settings Tab and select Basic Settings.
2
In the Authentication Method menu, select one of the
following based on what is supported by the devices in your
network:
WEP-Open
WEP-Shared
WEP-Auto
If you are unsure select WEP-Auto.
3
In the WEP Encryption menu, select enable WEP
Encryption to encrypt data.
4
In the Key Index field, set the WEP key to transmit data on
your wireless. The WEP key must match with the AP's Key.
5
In the Pass Phrase field select [WEP-64bits] or [WEP-
128bits] in the WEP encryption field to generate four WEP
keys automatically.
26 802.11n Wireless Router User Manual