Wep Configuration - Zoom 4506BG User Manual

WEP Configuration

Wired Equivalent Privacy (WEP) is a basic encryption method that does not offer the
security strength of WPA or WPA2. Use this method only if some of your network's
wireless devices, such as a gaming console, do not support WPA2/WPA.
Important! If you choose to configure your router using WEP encryption, then you
must configure all devices on your wireless network with the same WEP encryption
method and key.
You can configure WEP encryption using the
Manager's Advanced program.
If you are using Mobile Broadband or WiMAX and are connected to the travel router
through your computers Ethernet port you can go right ahead and log into the
configuration manager. If you are using a wireless connection to access the Travel
router you must first set up the wireless connection. If you are unsure how to set up a
wireless connection see
and ADSL modem users must access the travel router through a wireless connection.
1
Turn on your computer and router, then launch the computer's Web browser.
2
In the Web browser address bar, type the router's default IP address,
http://192.168.1.1 and then click Enter.
When the MAIN MENU opens for the first time, it displays a System Status page
that summarizes the current settings and values for your system.
3
On the Toolbar, type admin (the default password) in the System Password field,
then click Login.
Note: Later, if you change the System Password, you will use the new password to
log in.
4
When you log in, the Configuration Manager opens its Main Menu. Select
Wireless on the left hand menu.
40
Wireless Setting Page
Establishing your Wireless Network
of the Configuration
on page 30. Cable
Travel Router with Wireless-N User Manual