Sharp ER-A520 Knowledge Book page 63

Procedure:
Enter the PGM2-Mode as previously outlined
1. Enter 2690
.
2. Depress [ ] key
3. Depress [@/FOR] key
4. Enter 1
5. Depress [@/FOR] key
6. Enter assigned channel numbers ( 4 digits)
7. Depress [SBTL] key
8. Depress the [CA/AT] key
Channel Assignment for COIN DISPENSER:
Quick Steps – Coin Dispenser
To quickly setup the ER-A520/ER-A530 to interface with a coin dispenser, please refer to the
outlined procedures below:
No. Description
Step–1 Connect the Coin Dispenser
Step–2 PGM Job#2690
Step–3 Program Reset
Step–4 PGM Job#2510
Specifications subject to change without notice: Revision date 10/07
Comments/Procedure
CH–1 or CH–2
2690 [.] [@] 1
or
2690 [.] [@] 1
Note: Must match the physical connection
•
Place the SRV-Key counter-clockwise to 6 o'clock position
(SRV' position)
•
Count 5 seconds
•
Turn SRV-Key clockwise to 7o'clock position (SRV position)
•
Verify"***PROGRAM RESET has printed on the journal-side
tape.
Verify that the Cashiers have a valid Drawer Assignment (1 or 2)
PERIPHERALS
@ 0001 [SBTL] [CA/AT] for CH–1)
@ 0002 [SBTL] [CA/AT] for CH–2)
Page 57 of 266