Sharp ER-A520 Knowledge Book page 234

520/ 530 Dealer Knowledge Book
ER-A A
Quick Steps – ECR to ECR Data Copy
To quickly setup the ER-A520/ER-A530 to copy the RAM Data from one unit to another, please
refer to the outlined procedure below:
No.
Step – 1 Connect each ECR
Step – 2 SRV Job#903
Step – 3 Set the Receiving ECR
SRV Job #998
Step – 4 Set the Sending ECR
SRV Job #996
Step – 5 Verify Completion
Step – 6 Program Reset
Precaution:
Ensure that the receiving ECR model is the same as the sending model ECR.
Page 228 of 266
Description Comments/Procedures
Channel 2 to Channel 2 Only
903 [.] @ 5000 [CA/AT] for 19200bps
Note: MRS default is 5000 (19200)
998 [.] @ [CA/AT]
996 [.] @ [CA/AT]
Look at the Sending and Receiving ECR's Journal Tapes
Note: Sending Unit will print [Send OK]
Receiving Unit will print [Received OK]
Execute a Program Reset at the Receiving Unit
Specifications subject to change without notice: Revision date 10/07