1) When power is applied to the DataTran modem, there is an LED indicator in the front of the
unit.
2) When AC Power is removed and re-applied, it is necessary to initialize the DataTran
Definitions
The interface for credit card authorization for the ER-A520 and ER-A530 will introduce new
terminology, which you should understand prior to installing the EFT solution. Some of the
terminologies associated with processing payments electronically are listed below.
1. Network Programming:
This is related to the Merchant Set Up information stored within the Data Tran Unit. The
merchant parameters within the Data Tran may be loaded via the ER-A520/ER-A530's
DIAL OUT/DIAL IN commands.
2. Initialization:
Used to synchronize/initialize the Data Tran SL upon installation, setting changes at the
ER-A520 and ER-A530 and when AC power becomes unplugged from the Data Tran SL or for
any reason.
3. Batch Execution:
The PGM mode is used for batch execution jobs.
4. Reports:
The PGM mode is used for reports.
Note:
Opening, Closing Credit Card Batches and Reports are available from the ECR.
Specifications subject to change without notice: Revision date 10/07
Credit Card Authorization
Page 199 of 266