Sharp ER-A520 Knowledge Book page 237

Section – 4: ECR to PC Sending
Step – 1.Connect the ER-A520/ER-A530 to the PC using the previously specified RS-232 cable.
Note: The RS-232 cable from the PC MUST be connected to Channel 2 of the ECR model.
Step –2. At the PC, select the [POS PC] button (Fig. 6).
Step – 3. Name the new program data to be saved (Fig. 7).
Specifications subject to change without notice: Revision date 10/07
(Fig. 6)
(Fig. 7)
UTILITIES
Page 231 of 266