Sharp ER-A520 Knowledge Book page 271

Error Descriptions
Although the LogoLoader PC utility is simple to execute, there are two places during usage of this utility
where you may encounter errors.
(1) While opening an image data file that does not meet the specifications during transfer or
conversion operations.
(2) During communications if the communications encounters problems for some reason.
1. Error Display when the image data does not meet specifications. (Fig. 14)
2. The following Communications error could result which are related to the ER-A520/530's SIO
communications function.
Code Description
01 COMMAND ERROR
02 PARITY ERROR
03 CHECKSUM ERROR
04 DATA SIZE ERROR
05 HARDWARE ERROR
06 POWER OFF ERROR (Power off during communication)
07 TIME OUT ERROR
08 DSR OFF ERROR (PC's DTR signal is "OFF")
11 TRANSMIT DATA SIZE ERROR
12 BLOCKSEQUENCEERROR
13 :NAKERROR
15 MACHINE TYPE ERROR (The different model's data is received.)
Note:
The above error codes are printed on the ER-A520/530's printer on the journal side.
Specifications subject to change without notice: Revision date 10/07
Figure 14
LOGO UTILITY
Page 259 of 266