Sharp ER-A520 Knowledge Book page 242

520/ 530 Dealer Knowledge Book
ER-A A
Error Messages
After communications is terminated, one of the following messages is printed.
1. SEND Operation
(1) Normal termination of a "SEND" operation....
I #996 SEND OK
(2) Communication Error of a "SEND" operation...
I #996 COM ERROR
(3) Time Out Error of a "SEND" operation...
I #996 TIME OUT
2. RECEIVE Operation
(1) Normal termination of a "RECEIVE" operation...
I #998 RECEIVE OK
(2) Communication Error of a "SEND" operation...
I #998 COM. ERROR
(3) Data Error of a "SEND" operation...
I #998 DATA ERROR
(4) Time Out Error of a "SEND" operation...
I #998 TIME OUT
3. Error Codes
01 = ID No. Error (ID No. in IDENQ is not correct)
02 = Parity Error
03 = Check Sum Error
04 = Data Size Error
05 = Hardware Error
06 = Power Off Error
07 = Time Out Error
08 = DSR Off Error
11 = Transmit Data Size Error
12 = Block Sequence Error (Irregular Sequence No. has been received)
13 = NAK Code Error (NAK code has been received)
15 = ECR Type Error (Models of the two ECRs are different
Note: All Error Messages are fixed
Page 236 of 266
I Job No. /Message
01 I Job No./Message/Error Code
I Job No. /Error Message
I Job No. /Message
01 I Job No./Message/Error Code
15 I Job No./Message/Error Code
I Job No. /Error Message
Specifications subject to change without notice: Revision date 10/07