Sharp ER-A520 Knowledge Book page 239

Section – 5: PC to ECR Receiving
Precaution:
Ensure that the receiving ECR model is the same as the program data.
Step – 1.Connect the ER-A520/ER-A530 to the PC using the previously specified RS-232 cable.
Step – 2. At the PC, select [PC POS] button (Fig. 10).
Step – 3. Select the program data to be sent (Fig. 11).
Specifications subject to change without notice: Revision date 10/07
(Fig. 9)
(Fig. 10)
(Fig. 11)
UTILITIES
Page 233 of 266