Advertisement
2004 F-Super Duty 250-550/Excursion Workshop Manual
CAUTION: Remember, the last step of this procedure is to tighten the
11.
axle shaft bolts to specification, after the wheel lug nuts have been tightened.
Install the brake rotor and caliper on the single rear wheel axles. For additional
information, refer to
12. Install the wheels and tires but do not tighten the lug nuts to specification at this time.
13. Check the axle lubricant level. For additional information, refer to
14. Lower the vehicle.
15. Tighten the wheel lug nuts. For additional information, refer to
16. Tighten the axle shaft retaining bolts.
http://www.fordtechservice.dealerconnection.c.../pubs/content/~WS4O/~MUS~LEN/20/S4O52F06.HTM (11 of 11) [9/12/2009 12:44:54 PM]
Section
206-04.
Section
205-02D.
Section
204-04.
Advertisement
