Advertisement
2004 F-Super Duty 250-550/Excursion Workshop Manual
CAUTION: Install a new hub seal each time the hub assembly is removed.
13.
NOTE: The inner bearing is located behind the hub seal.
Pack each bearing and replace the hub seals. For additional information, refer to
Bearings, Wheel Hub Seal and Wheel Bearing Cups
CAUTION: Use extreme care not to scratch or gouge the seal or bearing
14.
surfaces.
If after hub removal, the hub seal or seal inner sleeve remains on the spindle, remove it
as shown using the Step Plate and the 2-Jaw Puller.
15. Inspect the seal surface and inner shoulder for scratches and damage.
Remove all scratches, gouges or galling damage with No. 600 or finer crocus
●
cloth.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS4O/~MUS~LEN/20/S4O52F06.HTM (5 of 11) [9/12/2009 12:44:54 PM]
in this section.
Wheel
Advertisement
