Advertisement
2004 F-Super Duty 250-550/Excursion Workshop Manual
CAUTION: Use extreme care not to damage the hub seal by allowing it to
3.
contact the spindle during installation.
NOTE: Coat the spindle and hub seal inside diameter with axle lubricant.
NOTE: Installing the rear hub in this manner causes the outer bearing to act as a pilot
making the installation easier.
Push the rear hub and outer bearing onto the spindle as an assembly.
Hold the outer bearing seated and use the bearing as a pilot.
●
CAUTION: Install a new hub nut if the hub nut comes apart during
4.
installation.
CAUTION: Make sure the hub nut tab is located in the keyway prior to
thread engagement.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS4O/~MUS~LEN/20/S4O52F06.HTM (7 of 11) [9/12/2009 12:44:54 PM]
Advertisement
