Advertisement
2004 F-Super Duty 250-550/Excursion Workshop Manual
3. Raise the vehicle to the desired working height, keeping the axle parallel with the floor.
For additional information, refer to
4. Release the parking brake.
5. Remove the wheel(s). For additional information, refer to
6. Remove the brake caliper and rotor on the single rear wheel axle. For additional
information, refer to
7. Remove the retaining bolts and axle shaft.
CAUTION: The hub nuts are right-hand thread (right hub) and left-hand
8.
thread (left hub). Each hub nut is stamped RH or LH.
Install the Ford Axle Locknut Socket so that the drive tangs of the tool engage the four
slots in the hub nut.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS4O/~MUS~LEN/20/S4O52F06.HTM (2 of 11) [9/12/2009 12:44:54 PM]
Section
Section
206-04.
100-02.
Section
204-04.
Advertisement
