Fujitsu ETERNUS Manual page 4

Preface
• Chapter 4 Checking the Server Information
This describes how to check the server information registered in the ETERNUS Disk storage
system.
• Chapter 5 Installing and Setting Up ETERNUSmgr
This describes how to install ETERNUSmgr.
• Chapter 6 Setting Up the ETERNUS Disk Storage Systems
This describes how to use ETERNUSmgr to set up the ETERNUS Disk storage systems.
• Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server
This describes how to install the iSCSI Software Initiator and set up the server.
• Chapter 8 Checking Connections
This describes how to check the connection status between server and ETERNUS Disk
storage systems.
• Chapter 9 Setting Up the Multipath Configuration
This describes what to be set in order to create multipath environment.
• Chapter 10 Creating a File System
This describes how to create a file system.
Safe Use of this Product
Using this manual
This manual contains important information to ensure the safe use of this product. Be sure to
thoroughly read and understand its contents before using the product. After reading, store this
manual in a safe place for future reference.
FUJITSU has made every effort to ensure the safety of the users and other personnel, and to
prevent property damage. When using this product, carefully follow the instructions described in
this manual.
Acknowledgments
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
• All SPARC trademarks are used under license and are trademarks or registered trademarks
of SPARC International, Inc. in the United States and other countries.
• The company names, product names and service names mentioned in this document are
registered trademarks or trademarks of their respective companies.
P3AM-4182-03ENZ0 Server Connection Guide (iSCSI) for Oracle Solaris
4
Copyright 2010 FUJITSU LIMITED