Set Up Using Ndps - Axis 540 User Manual

Section 4: Setting Up - NetWare

Set Up using NDPS

Note:
Installing the
AXIS 540/640
Public Access
Notes:
36
The AXIS 540/640 supports Novell Distributed Print Services
(NDPS), which is Novell's new generation protocol for printer
administration and printing.
Before the AXIS 540/640 can be installed, you must install NDPS and
an HP Gateway on your NetWare file server. The HP Gateway is
included with the NDPS software and is automatically installed
together with NDPS. The AXIS 540/640 uses the HP Gateway when
communicating with an NDPS printer.
Please refer to the appropriate Novell and Hewlett Packard
documentation for further details about NDPS and the HP Gateway.
Please note that NDPS is not supported by AXIS 540 and AXIS
542.
You can select to install the connected printers as public or controlled
printers. Follow the instructions below to install the AXIS 540/640
using NDPS:
1. Make sure that the HP Gateway is configured to automatically
create a public access printer.
2. Connect the AXIS 540/640 to the NetWare network, if it is not
already connected.
As soon as the HP Gateway finds the AXIS 540/640, it will
automatically create a public access printer. Any user have access to the
public access printer, which is found with the Novell Printer Manager.
NDPS requires that you run NetWare 4.11 or higher.
NDPS is supported by Windows 95 and Windows 3.1 clients.
You can disable the NDPS feature, by setting the
HP_JETADMIN parameter to NO.
AXIS 540/640 User's Manual