Windows Nt - Axis 540 User Manual

Windows NT

Using the
AXIS Print Monitor
with
Windows NT 4.0
NetBIOS/NetBEUI
AXIS 540/640 User's Manual
Follow the procedure below to install Axis Printer Ports from a
Windows NT 4.0 workstation:
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click on the Add Printer icon.
2. The Wizard asks you to select between My Computer and
Network printer server. Select My Computer, as the AXIS
540/640 emulates a local printer port.
3. Click Add Port... in the Available ports dialog, select AXIS Port
and click New Port...
4. Select the AXIS Port you wish to add. The port appears as
<name>.LP1, where <name> is AX followed by last six digits of
the AXIS 540/640 serial number, e.g. AX100086. Click OK.
5. Close the Printer Ports window.
6. Click the Configure Port... button. Choose whether error
condition pop-up messages are to be displayed by checking the
box in the Configure Axis Ports dialog. Define the frequency at
which the error messages should be displayed after retry. Click
OK. Continue the installation by clicking Next>.
7. Choose the appropriate print driver for your printer. Click Next>
and then proceed directly to step 10. It is only necessary to
perform steps 8- 9 if your printer does not feature within the
model list.
8. Click the Have Disk... button. Insert the print driver diskette into
the floppy disk drive of your computer. If the floppy disk drive is
A:/ then click OK, otherwise type the letter of your disk drive and
then click OK.
9. Select the desired printer you want to install from the diskette and
click Next>.
Section 5: Setting Up - Windows
W W indows
57