Windows Clients Using Lantastic - Axis 540 User Manual

W W indows
Section 5: Setting Up - Windows
Client-Server Printing:
Client Setup

Windows Clients using LANtastic

Note:
70
Follow these steps to use your AXIS 540/640 for client-server printing
at a Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
3. Select Network... in the Device Name list, select a local port
(LPT1 - LPT3) to redirect to your network printer.
4. In the Show Shared Printers on list, select the server from Server
Setup above.
5. In the Shared Printers list, select the printer you want to use.
6. Click OK, OK and Close.
7. Exit the Control Panel.
The client setup is completed and you can now print through your
AXIS 540/640.
From any Windows client, the AXIS 540/640 may also be used for
network printing within LANtastic environments.
LANtastic users may use the AXIS Utilities in exactly the same manner
as described in the proceeding Windows sections, using a choice of
Axis utility software that is guided by the type of Windows client
employed:
• Refer to Using the AXIS Print Utility for Windows if you are using
a Windows for Workgroups client.
• Refer to Using the AXIS Print Monitor for Windows 95 and NT if
you are using either a Windows 95 or Windows NT client.
Make sure that your LANtastic client is running the desired
printing protocols.
AXIS 540/640 User's Manual