Connecting The Axis 540/542 To Ethernet Networks - Axis 540 User Manual

Connecting the AXIS 540/542 to Ethernet Networks

Note:
AXIS 540/640 User's Manual
1. Switch off the printer and disconnect the AXIS 540/542 external
power supply.
2. Note the AXIS 540/542 serial number found on the underside
label of the print server. You need this number during the
network configuration.
3. Connect your AXIS 540/542 to the network using either twisted
pair (10baseT), or thin wire (10base2) cable.
4. Switch on the printer and connect the external power supply to
the AXIS 540/542.
5. Successful connection of the AXIS 540/542 to your network will
be confirmed by the intermittent flashing of the Network
Indicator.
6. You are now ready to install your server onto your network using
one of the methods detailed in the Installation Guide on page 21.
By commencing with your preferred installation method, you can
further verify that your AXIS 540/542 is properly connected to
your network.
Each AXIS 540/542 Print Server is pre-configured with a unique
Node Address that is identical to the serial number. This can be
changed using the AXIS NetPilot™, or any standard Web
browser, if required.
Section 3: Basic Installation
19