Setup Using Ndps - Axis 540plus User Manual

Setup using NDPS

Installing the Axis
Network Print Server
in the NDPS
environments
Important:
AXIS 540+ / AXIS 560 User's Manual
The AXIS 540+/AXIS 560 supports Novell Distributed Print Services
(NDPS). You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.
Before the AXIS 540+/AXIS 560 can be installed, make sure that NDPS is
installed and a Broker is loaded on your NetWare file server.
The Axis Network Print Server uses the AXIS NDPS Gateway for printing
in networks using either IP or IPX as transport protocols. The printer
gateways are included with the NDPS software (from version 5.1 and up)
and are automatically installed together with NDPS.
Having assigned an IP address to the AXIS 540+/AXIS 560 as described
in Assign an IP Address to the Print Server, on page 14, you are now
ready to install the Axis Network Print Server for NDPS printing. You can
select to install the connected printers as public or controlled access
printers. Follow the instructions below to install the Axis Network Print
Server using NDPS:
• The NDPS Enabled parameter of the Axis Network Print Server is by default enabled. It must
be set to Yes in order for the communication between the print server and the NDPS gateway
to be enabled. To change this parameter, log in to the print server's Web pages and choose:
Admin | Network Settings | Detailed View | NetWare => NDPS Enabled => Yes.
• If you do not have an NDPS Manager object available, start out with creating one in the Net-
Ware Administrator.
Adding Printers in NetWare
43