Configuring Via Keypad - TIPTEL IP 280 Manual

Enterprise IP Phone
Note:
Using the wrong network parameters may result in inaccessibility of your phone and
may also have an impact on your network performance. Please contact your network
administrator.
Account Settings
The phone attempts to register to the SIP server using the account data provided by the
automatic or manual initialization.
Choose Account, you will find the following parameters:
Field
Register Status
Account Active
Label
Display Name
Register Name
User Name
Password
SIP Server
When all accounts register fail, phone will display "No Service" by default.
When the phone reboot, it will register automatically. If many phones register at the
same time, this will affect the server, the users can set the register power up time so
that the phone will random register automatically within the set time.
Setting the power up time via web interface:
Choose Network->Advanced-> Registration random, enter the time in the field.
Note:
Should the IP PBX (SIP registrar) require an authentication, you will be prompted to
enter the correct password. Make sure you are using the appropriate input method or
enter the password via the web user interface.

Configuring via keypad

Network Settings: Press MENU->Settings->Advanced, enter the password, and
choose Network->WAN Port/PC Port /VLAN/Web Type/802.1x Settings to enter the
internet relating configuration page.
Account Settings: Press MENU->Settings->Advanced, enter the password, and
choose Accounts->OK to configure the account settings.
You can refer to the above "Configuring via Web Page" for the parameter detail.
It shows the register status of the phone.
You can choose on/off to enable/disable the account respectively.
The name showing on the LCD of current device.
The local phone name showing on the other phone when calling.
Register name provided by ISP.
User account information, provided by ISP.
Account password provided by ISP.
SIP server address provided by ISP.
Description
- 5 -
Getting Started