Removing And Installing The Battery; Removing The Battery - XPLORE TECHNOLOGIES ix104C2 User Handbook Manual

Chapter 2. Using the iX104C2
Using the battery
58

Removing and installing the battery

You can remove the battery and use an (optional) external charger to
charge it.

Removing the battery

To swap with a charged battery:
1.
Use one of the methods described in "Suspending operation"
on page 40 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see "Suspending operation" on page 40).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Suspended mode before
removing the battery.
2. Use the stylus or a pen to depress the battery lock button.
3. On the computer, slide the battery release latch toward the lock
button.
The battery unlocks and slightly rises from the computer.
iX104C 2 User's Handbook