Calibrating The Digitizer: Touch Mode - XPLORE TECHNOLOGIES ix104C2 User Handbook Manual

Chapter 3. Maintaining the iX104C2
Calibrating the digitizer
84

Calibrating the digitizer: Touch mode

Start
1. From the menu, select
The Touch Utility window opens.
2. Click the appropriate
Note: Xplore Technologies recommends 5 Pt or 9 Pt
calibration, for greater accuracy.
The Calibration program starts.
3. Follow the instructions that appear on the screen.
4. When you finish, click
All Programs > Touch Utility
Calibration
button.
OK
.
iX104C
.
2 User's Handbook