Table of Contents
Advertisement
iX104 User's Handbook
Removing and installing the battery
You can remove the battery and use an (optional) external charger to
charge it.
Removing the battery
1.
To swap with a charged battery:
Use one of the methods described in "Suspending operation"
on page 37 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see "Suspending operation" on page 37).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Suspended mode before
removing the battery.
Chapter 2. Using the iX104
Using the battery
55
Advertisement
Table of Contents
