If You Have An External Battery Charger; Removing And Installing The Battery; Removing The Battery - XPLORE TECHNOLOGIES ix104c4 User Handbook Manual

iX104C 4 User's Handbook
Table 4 shows the approximate time required to charge the battery
level to 100%.
Table 4 Approximate battery charge time
Battery pack capacity
41 watt hours (5700 mAh)
55 watt hours (7600 mAh)

If you have an external battery charger

Remove the battery pack (see page 55).
1.
Use the external battery charger to charge the battery.
2.
Install the battery (see page 57).
3.

Removing and installing the battery

You can remove the battery and use an (optional) external charger to
charge it.

Removing the battery

1. To swap with a charged battery:
Use one of the methods described in "Suspending operation"
on page 34 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see "Suspending operation" on page 34).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Suspended mode before
removing the battery.
Chapter 2. Using the Tablet
Using the battery
Charge time
2.5 hours
3.5 hours
55