Chapter 2. Using the iX104AtR
Using the battery
58
Removing and installing the battery
You can remove the battery and use an (optional) external charger to
charge it.
Removing the battery
To swap with a charged battery:
1.
Use one of the methods described in "Suspending operation"
on page 40 to suspend operation.
If a charged battery is not available:
Save your work and close all running programs; then shut
down the computer or put the computer in Hibernation mode
(see "Suspending operation" on page 40).
Note: To avoid losing unsaved data, wait until the computer
has completed switching to Suspended mode before
removing the battery.
2. Use the stylus or a pen to depress the battery lock button.
3. On the computer, slide the battery release latch toward the lock
button.
The battery unlocks and slightly rises from the computer.
iX104AtR User's Handbook