Turbulator Installation; Reflector Installation - Roberts Gorden GordonRay BH-40 Installation, Operation & Service Manual

BH-S I , O
ERIES NSTALLATION PERATION AND
Step 6.4 Turbulator Installation
Turbulator
2.5' Section
Turbulator
Adapter
Turbulator section 2.5'
(76.2 cm) (stainless) used in
BH-40 heaters must be in the
section of turbulator nearest
to the burner.
Description
Turbulator Adapter 2.5' (76.2 cm)
Turbulator Section 2' (61 cm)
Turbulator Section 2.5' (76.2 cm)(Stainless)
Tube
Step 6.5 Reflector Installation
Hanger
Description
Tube/Reflector Hanger
Burner Tube
Reflector
18
S M
ERVICE ANUAL
Tab
Fold tab around outside
of tube nearest to the vent to
hold turbulator in place.
Part Number
03051503
03051504
03051505
91409XXX
Burner Tube
Reflector
Part Number
03090100
03051XXX
02750303
Turbulator must be installed in the last
standard section of tube. Turbulator is
not required on the BH-125/150/175/200.

Turbulator Installation

Model
BH-40
BH-60
BH-80
BH-100
BH-115
BH-125
BH-140
BH-150
BH-175
BH-200
Pull String
NOTE: All tube surfaces must
be covered by a reflector,
except for a U-tube.
Tube Section
1st 10' (3 m) Section
2nd 10' (3 m) Section
2nd 10' (3 m) Section
3rd 10' (3 m) Section
3rd 10' (3 m) Section
N/A
4th 10' (3 m) Section
N/A
N/A
N/A