Roberts Gorden GordonRay BH-40 Installation, Operation & Service Manual page 34

BH-S I , O
ERIES NSTALLATION PERATION AND
Step 7.5.2 Frame Shield Installation
Shield
Step 7.5.3 Reflector Side Extension Installation for Decorative Grilles
NOTE: If the decorative grille system is to
be installed in an area with considerable
air movement, it is recommended that one
#8 x 3/8" (3.9 x 9.5 mm) sheet metal screw
be installed per reflector extension to
prevent it from blowing over.
Distance "A"
Minimum Maximum
2" (4 cm) 6" (15 cm)
6" (15 cm) 10" (26 cm)
10" (26 cm) 14" (37 cm)
28
S M
ERVICE ANUAL
A
Extension
Part No. Width
01370408 8" (20 cm)
01370412 12" (30 cm)
01370416 16" (40 cm)
Description
Deco Grille Shield
Cut relief notches for tube
and reflector hangers
Reflector Side
Extension
Description
Reflector Side Extension
Part Number
01365900
Insert screw
here
Part Number
01370412