4.19.4 Setting DGPS beacon
The frequency and Baud rate of the received beacon station can be set.
Display example
[STATUS/SF Menu] display mode
(1) Press
in the [STATUS] display mode.
This action displays the [STATUS/SF MENU] .
(2) Turn
to select [DGPS Beacon] and press
When a DGPS beacon receiver or DGPS receiver (DGPS200) is not connected, the message [No
CONNECT].
(3) Setting Receive mode
Turn
to select mode and press
When [ Auto ] is selected, the display return to [STATUS/SF Menu].
(4) Enter the frequency and Baud rate.
When [ Manual ] is set, enter the values in [FREQUENCY] and [BAUD RATE].
[STATUS/SF MENU DGPS] display mode
.
.
GPS Navigator J-NAV500
61