GPS Navigator J-NAV500
4.17.3 Erasing, copying and measuring waypoints
The following three functions are described below.
•
Erasing waypoints: Erasing waypoints no longer required.
•
Copying waypoints: Copies registered waypoints. For information on how to edit copied waypoints,
see Section 4.17.1, "Editing Waypoints."
•
Measuring between waypoints: Bearing and distance between any two registered waypoints can
be measured.
Display example
[ERASE/COPY/MEASURE] display
[WAYPOINT
NEMU]
1.
Erasing waypoints
(1) Press
in the [WAYPOINT] display mode.
(2) Turn
to select [ERASE/COPY/MEASURE] and press
(3) Turn
to select [ERASE WAYPOINT] and press
(4) Turn
to select the number of the waypoint to erase and press
The message [ARE YOU SURE? ENT] appears.
¥ Press
to erase.
¥ Press
52
[MEASURE] display
to cancel erasure.
[ERASE] display
[COPY] display
.
.
.