Service Clearance - Carrier WeatherMaker 48TC Series Product Data

LOC DIMENSION
48--- in (1219 mm)
36--- in (914 mm)
A 18--- in (457 mm)
18--- in (457 mm)
12--- in (305 mm)
36--- in (914 mm)
B 12--- in (305 mm)
Special
36--- in (914 mm)
C
18--- in (457 mm)
48--- in (1219 mm)
42--- in (1067 mm)
D
36--- in (914 mm)
Special
NOTE: Unit not designed to have overhead obstruction. Contact Application Engineering for guidance on any application planning overhead
obstruction or vertical clearances.
CURBS, WEIGHTS & DIMENSIONS (cont.)
Fig. 6 - - 48TC 08- -12
C
B
Fig. 7 - - Service Clearance
CONDITION
Unit disconnect is mounted on panel
If dimension--- B is 12--- in (305 mm)
No disconnect, convenience outlet option
Recommended service clearance (use electric screwdriver)
Minimum clearance (use manual ratchet screwdriver)
Unit has economizer
If dimension--- A is 36--- in (914 mm)
Check for sources of flue products within 10--- ft of unit fresh air intake hood
Side condensate drain is used
Minimum clearance
No flue discharge accessory installed, surface is combustible material
Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)
Surface behind servicer is electrically non--- conductive (e.g., wood, fiberglass)
Check for adjacent units or building fresh air intakes within 10--- ft of this unit's flue outlet
D
A
23
C10299
C11247