Technical Data; Drill Speed And Drill Sizes - Husqvarna DM 220 Operator's Manual

Electric motor
Rated voltage, V
Rated output, W
Rated current, A
230 V
100-120 V
Weight, kg
Volume gear box oil, dl
Gear box oil, type
Diameter drill bit, mm
Max. diameter of the drill bit, with stand
Max. diameter for the drill bit, handheld
Spindle thread
Water connector
Water pressure - max, bar
Stand, mm
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels, a (see note 3)
hv
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 60745-2-1. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 60745-2-1. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .

Drill speed and drill sizes

Drill bit speed Drill bit load
Gear
with load, rpm without load, rpm
1 580 730
2 1400 1700
3 2900 3600

TECHNICAL DATA

DM 220
Single-phase
230/100-120
1850
8 A
13 A
7
0,25
Mobilube 1 SHC 75W-90 or
similar.
150 mm (5,9")
75 mm (3")
G 1/2"
G 1/4"
8
Ø 60 mm
107
108
93
2,8
2,6
Handheld drilling
Recommended Recommended
drill bit size, mm drill bit size, inch
Not Not
recommended recommended
40-80 2-4
0-40 0-2
G 1 1/4"
) in conformity with EN 60745-2-1.
WA
Stand drilling
Recommended
drill bit size, mm
100-150
40-80
0-40
Recommended
drill bit size, inch
4-6
2-4
0-2
– 15
English