Camera Process [2/2] Menu Screen - JVC GY- HD101 Instruction Manual

MENU SCREENS

CAMERA PROCESS [2/2] Menu Screen

Item
WHITE CLIP
KNEE
LEVEL
MOTION SMOOTH
ADVANCED PROCESS..
PAGE BACK
66
Function/Setting (bold characters indicate initial settings)
Sets the white clipping point on input video signals with a high luminance level.
108% : The white clipping point is set at a luminance level of 108%.
100% : The white clipping point is set at a luminance level of 100%. If the screen is too white at
108%, set it to 100%.
Sets whether to run the "knee" function, which compresses video signals over a certain level to render the tonality
in the highlight areas, automatically or manually. Set "MANUAL" when you want to check the bright areas, and adjust
the knee point manually.
AUTO : Adjusts the knee point automatically, according to the luminance level.
MANUAL : You can change the luminance level in the "LEVEL" item.
Sets the start point for knee compression (knee point).
Increase the number : Raises the knee point level.
Decrease the number : Lowers the knee point level.
[Settings: 80%, 85%, 90%, 95%, 100%]
MEMO
When the "KNEE" item is set to "AUTO", "-----" is displayed and this cannot be selected.
Makes the video smoother when the tape is played back by adding frames to the signal recorded on the tape during
progressive shooting.
OFF : Does not function.
ON : Functions.
MEMO
This can be set when you select "HDV-HD30p", "HDV-HD25p", or "HDV-HD24p" in the "REC" item on the VIDEO
FORMAT menu screen.
When this cannot be set, "-----" is displayed.
Calls up the ADVANCED PROCESS menu screen.
X See "ADVANCED PROCESS Menu Screen" on page 67.
When the cursor is in this position, press the SHUTTER dial to return to the CAMERA PROCESS [1/2] menu screen.