Time/Date Menu Screen - JVC GY- HD101 Instruction Manual

MENU SCREENS

TIME/DATE Menu Screen

Item
DISPLAY
DISPLAY MODE
DISPLAY STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
TIME SHIFT
CLOCK ADJUST
PAGE BACK
76
Function/Setting (bold characters indicate initial settings)
Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder.
OFF : Not displayed.
ON : Displayed.
When a tape with time and date not recorded is played back, there will be no display of time and date even when
this item is set to ON.
In the Camera mode, the date and time are displayed in accordance with the following settings.
In the VTR mode, if the DATE REC item is set to OFF, the date and time recorded on a tape are displayed in accor-
dance with the following settings.
BARS+CAM : Date and time are always displayed.
BARS : Date and time are displayed when the color bars are output.
CAM : Date and time are displayed when the camera images are output.
When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected.
Selects the style for the date and time display.
DATE+TIME : Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected.
Selects the style for the date display.
YY/MM/DD : Displayed in the format of year/month/date.
MM/DD/YY : Displayed in the format of month/date/year.
DD/MM/YY : Displayed in the format of date/month/year.
Variation Range: U model: MM/DD/YY E model: DD/MM/YY
When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected.
Selects the style for the time display.
24 HOUR : Displays the time using the 24-hour system.
12 HOUR : Displays the time using the 12-hour system.
When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected.
Selects whether to display the seconds in the time display.
ON : Seconds are displayed.
OFF : Seconds are not displayed.
When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected.
Sets the clock OFFSET time. (1H steps)
Adds time to the built-in clock (time compensation) and displays it. The adjusted time is also recorded on the tape.
[Settings: –23H - –1H, OFF, +H - +23H]
To adjust the date and time, align the cursor with this position and then press the SHUTTER dial.
The date and time are set on the CLOCK ADJUST screen.
X See "Setting the Date and Time" on page 37.
The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed while the cursor is at this position.