Advanced Function Setting Level; Protect Level - Omron E5CN Manual

E5CN

Advanced Function Setting Level

Parameter initialize
Number of multi-SP uses
Event input assignment 1
Event input assignment 2
Multi-SP uses
SP ramp set value
Standby sequence reset
method
Alarm 1 open in alarm
Alarm 1 hysteresis
Alarm 2 open in alarm
Alarm 2 hysteresis
HBA ON/OFF
Heater burnout latch
Heater burnout hysteresis
ST stable range
For setting deviation.
α
PID parameter
MV upper limit
MV lower limit
Input digital filter
For setting time constant in seconds.
Additional PV display
Displayed first in the operation level
Manipulated variable display
Automatic return of display mode
Automatically reset to the operation level
when no key operation are performed.
Move to calibration level
Resets to the default value.
Input setting: Multiple
SP/RUN/STOP
ON/OFF setting of alarm
output 1
ON/OFF setting of alarm
output 2
Limitations to MV

Protect Level

Operation/adjustment protection
Restricts display and modification of menus in the
operation and adjustment levels.
Initial setting/communications protection
Restricts display and modification of menus in the initial
setting, operation level and adjustment levels.
Setting change protection
Protects changes to setups by operating the front
panel keys.
Operation/Adjustment Protection
The following table shows the relationship between set values
and the range of protection.
Set value
Level
0

Operation PV
level l l
PV/SP
Other
Adjustment level
When this parameter is set to "0," parameters are not protected.
Default setting: 0
:
Can be displayed and changed

: Can be displayed


: Cannot be displayed and move to other levels not possible
Initial Setting/Communications Protection
This protect level restricts movement to the initial setting level,
communications setting level and advanced function setting level.
Set Initial setting Communications
value level setting level
 
0
 
1
2 X X
Default setting: 1


: Move to other levels possible
: Move to other levels not possible
Setting Change Protection
This protect level protects setup from being changed by
operating the keys on the front panel.
Set value Description
OFF Setup can be changed by key operation.
ON Setup cannot be changed by key operation.
(The protect level, can be changed.)
Default setting: OFF
E5CN
1 2 3
  
X X
X X X
Advanced
function
setting level

X
X