To Remove The Appliance From The Fireplace - Baxi 748 Installer's Manual

16.13 To remove the main burner injector.
(See figure 48).
1. Remove the burner (See section 16.12).
2. Remove the burner clamping screw (See figure 48).
3. Unscrew the injector from the burner
4. Refit in the reverse order.

16.14 To remove the appliance from the fireplace.

1. Remove the burner unit (See section 16.6).
2. (See section 9.1 of this guide), slacken the
hexagonal adjusters on the cable retainers and unscrew
the thumbscrews to release the cables.
3. Refit as described in the relevant installation
sections. Make sure gas soundness, sealing, spillage test and performance are
satisfactory.
©
Baxi Heating U.K. Limited 2006.
INSTALLER GUIDE
Page 41
Figure 48. Main burner
injector removal