To Replace The Slider Control Button; To Remove The Burner Unit - Baxi 748 Installer's Manual

16.5 To replace the slider control button.

1. Remove the fascia (See section 16.4)
2. Detach the slider control from the fascia by
removing two screws (See figure 40).
3. Detach the control slide button
from the slider control by
removing two screws (See figure
41).
4. Replace in the reverse order.

16.6 To remove the burner unit.

1. Remove the fascia (See section 16.4).
2. Remove the ceramic fuel effect pieces.
3. Support the inlet 'T' connector to avoid straining the
pipework and disconnect the appliance
from the 'T' connector.
4. Detach the burner unit from the
hotbox by removing two screws (See
figure 42).
5. Replace in the reverse order.
©
Baxi Heating U.K. Limited 2006.
INSTALLER GUIDE
Figure 40. Slider control
removal
Figure 42. Burner attachment points
Page 37
Figure 39. Fascia removal
(Shown with 'Chic' fascia)
Figure 41. Slider
button removal