Frequently Asked Questions; Technical Faults - Miele PG 8080i Operating Instructions Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Problem
When the dishwasher
is turned on with the
- button, the display
stays dark and the
Start/Stop indicator
does not flash.
The dishwasher stops
during a program.
One of the following
fault messages is
displayed:
; Fault FXX
L Waterproof

Frequently asked questions

Possible fault
The dishwasher is not
plugged in.
The circuit breaker has
tripped.
The circuit breaker has
tripped.
There may be a technical
fault.
The waterproof system
reports a fault.
Solution
Insert the plug.
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele .
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele .
Before fixing the fault:
– Press the - button to turn
the dishwasher off.
After a few seconds:
– Turn the dishwasher back
on.
– Select the desired
program.
– Press the "Start/Stop"
button.
If the error message is
displayed again, there is a
technical fault.
– Contact Miele.
– Turn off the tap.
– Contact Miele.
59