230V Above Ground (Europe); 230V Single Phase - SPX Power Xpress Installation Manual

Bollard charge station
Table of Contents

Advertisement

Power Xpress™ Bollard Charge Station
Installation Guide

230V Above Ground (Europe)

230V Single Phase

Figure 4. 230V Single Phase
EL-50600-17 Rev. A
LINE (H)
230VAC
NEUTRAL (N)
EARTH
WARNING: The EVSE is a single-phase
device. When connecting the line and
neutral wires, take care that the service
transformer
secondary
known, and the wires from the main
circuit
breaker
panel
connected and labeled. The following
service connections are primarily used in
Europe and Australia (sometimes known
as "TT Power Grid"). Please reference
the following diagram. The line, neutral,
and earth outputs on the illustration
correspond to the inputs on the EVSE.
WARNING: The line connection must
measure 230V RMS to neutral. Earth must
also be connected to the EVSE.
connection
is
are
correctly
9

Advertisement

Table of Contents
loading

Table of Contents