Table of Contents
Advertisement
TOOLS SUGGESTED FOR INSTALLATION (NOT PROVIDED)
Tape measure
2-ft Level
Pencil
Power hammer drill
Small flat-blade screwdriver
7/16-in. Open-end wrench
7/16in
1/2-in. Ratchet and sockets
6
Power Xpress™ Bollard Charge Station
Installation Guide
Wire cutters
Wire stripper
Nonmetallic wire stripper
Masonry drill bit set
Needle-nose pliers
Expandable pliers
Torque wrench
EL-50600-17 Rev. A
Advertisement
Table of Contents
