Honeywell HNDR series User Manual page 22

9
[HSD-251 Control]
9
• Select "HSD-251" PTZ on "Pan/Tilt Settings" of Setup to display the windows (
• Following are major functions of Honeywell Scan Dome Camera (HSD-251).
[Preset/ Auto scan/ Tour Function]
• Moving 10 Pre-positions is available. (
• Monitoring 1 Auto scan zone is available.
• Continuous monitoring 10 pre-set pre-positions is available (Tour).
[Preset/ Auto scan/ Tour/ Camera Menu Setup]
• Preset: Press the "PTZ SETUP" button (
and direction change buttons (
Setup. All ten Presets can be set up similarly.
• Auto scan: Press the "PTZ SETUP" button (
"FUNCTION", and set the Left Zone Monitoring with the Left button (
Monitoring with the Right button (
• Tour: Press the "PTZ SETUP" button (
and the Preset button that you want to monitor consecutively among the set Preset buttons (
complete the Tour Setup. If 10 Presets are set in advance, all 10 zones can be monitored
consecutively, but only 1 Tour function is possible.
• Camera Menu: Press the "CAMERA MENU" button (
buttons ( (Enter),
[Preset/ Auto scan/ Tour Control]
• Press the "PRESET" button of "FUNCTION" and 1 ~ 10 pre-set Preset buttons to enable operation,
and press the "PRESET" button again to disable the operation.
• Press the "Auto scan" button of "FUNCTION" to enable operation, and press the "Auto scan"
button again to disable operation.
• Press the "TOUR" button of "FUNCTION" to enable operation, and press the "TOUR" button
again to disable operation.
[P/T Speed, Z/F Speed Control]
• Controls the Zoom/Focus speed as well as the Pan/Tilt speed in 1 ~15 stages.
[P/T , Z/F, Direction Control]
• Pan/Tilt, Zoom/Focus, and direction change (Up/ Right Up/ Right/ Right Down/ Down/ Left Down
/ Left/ Left Up) are available.
~
1 0
) of "SET UP", the "PRSET" button (
) to press one of the 10 Preset buttons (
) to complete the Zone Setup.
) of "SET UP", the "TOUR" button (
(ESC), (Up), (Down)) to set the camera Menu.
21
)
) of "SET UP", "AUTOSCAN" button (
) of "SET UP" and the direction change
).
9
) of "FUNCTION",
) to complete the Preset
1
), set the Right Zone
) of "FUNCTION",
1
) of
) to