Honeywell HNDR series User Manual page 50

[Display Configuration]
4
• Initial view screen: Set the type of split screen window to be displayed on HNDR-Net login.
• Data location: Set the data location to be used when pressing the "Save" button on HNDR-Net.
(Be sure to specify a data location. Otherwise, data may not be saved.)
• Log file: Set the file name to be used to save the event log.
• Switching interval: Set the switching interval for multiple screens when you view them on a single
screen.
• On screen display: Select when you want to display Position number of image, Site name, or
Camera No/Name.
• Name display: Select how the selected information should be displayed.
Use "Always" to display on screen display information all the time.
Use "On mouse over" to display on screen display mode information only when you move the
mouse over the image screen.
• Press the "OK" button to apply.
• Use IP Server : Set the IP Server for management of dynamic IP address.
(Please note that IP Server must use fixed IP .)
* Use IP Server : Select IP server to use
* Code : Enter the code of the site that will connect to the HNDR system.
* Server : Enter the IP address of the IP server that will connect to the HNDR system.
[Apply/Cancel]
5
• Applies or cancels the settings on each item.
49