PB Heat SERIES MI User's Information Manual
  1. Manuals
  2. Brands
  3. PB Heat Manuals
  4. Boiler
  5. MI Series
  6. User's information manual

PB Heat SERIES MI User's Information Manual

Gas boilers
Hide thumbs Also See for SERIES MI:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
U
S
ERIES
TO THE INSTALLER: This manual is the property of the owner and must be affixed near the boiler for
TO THE OWNER: This boiler should be inspected annually by a Qualified Service Agency.
Service Agency
Address
Boiler Model No.
I
SER'S
NFORMATION
MI/MIH
future reference.
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
– Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch;
do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
– Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
TO BE COMPLETED BY THE INSTALLER
PB HEAT, LLC
131 S. CHURCH ST • BALLY, PA 19503
G
™
AS
Serial No.
M
ANUAL
B
OILERS
Phone No.
Date of Installation:
©2011 PB Heat, LLC. All rights reserved.
MI8039 R6 (6/11-4M)
Printed in U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SERIES MI and is the answer not in the manual?

Questions and answers

Related Manuals for PB Heat SERIES MI

Summary of Contents for PB Heat SERIES MI

  • Page 1 TO BE COMPLETED BY THE INSTALLER Service Agency Phone No. Address Boiler Model No. Serial No. Date of Installation: PB HEAT, LLC 131 S. CHURCH ST • BALLY, PA 19503 MI8039 R6 (6/11-4M) Printed in U.S.A. ©2011 PB Heat, LLC. All rights reserved.

  • Page 2: Basic Operation

    Basic Operation WARNING Service on this boiler should be undertaken only by trained and skilled personnel from a qualified service agency. CAUTION Should overheating occur or the gas supply fail to shut off, do not turn off or disconnect the electrical supply to the pump.
  • Page 3 Figure 1: Control Locations B. Instructions to place boiler in operation and to turn off the boiler are shown on the Operating or Lighting Instruction Label posted on the left side of the boiler. The instructions are also shown in Figures 2 and 3.

  • Page 4: For Your Safety Read Before Lighting

    FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. A. This appliance is equipped with an ignition device Immediately call your gas supplier from a which automatically lights the pilot.
  • Page 5 Figure 3: Standing Pilot Lighting Instructions...
  • Page 6 Figure 4: Figure 5: Intermittent Ignition Sequence of Operation Standing Pilot Sequence of Operation...

  • Page 7: User Maintenance

    User Maintenance WARNING Product Safety Information Refractory Ceramic Fiber Product This appliance contains materials made from refractory ceramic fibers (RCF). Airborne RCF, when inhaled, have been classified by the International Agency for Research on Cancer (IARC), as a possible carcinogen to humans. After the RCF materials have been exposed to temperatures above 1800°F (980°C), they can change into crystalline silica, which has been classified by the IARC as carcinogenic to humans.
  • Page 8 WARNING Service on this boiler should be undertaken only by trained and skilled personnel from a qualified service agency. Inspections should be performed at intervals specified in the Installation, Operation and Maintenance Manual and this User’s Information Manual. Maintain manuals in a legible condition. Keep boiler area clear and free of combustible materials, gasoline and other flammable vapors and liquids.
  • Page 9 8. Adjust all thermostats to lowest setting to shut down boiler. 9. Replace burner observation cover and control access panel. 10. Adjust thermostats to normal setting. D. Controls (as required by control manufacturer) 1. Safety Relief Valve. Conduct try lever test as outlined in manufacturer’s instruction tag on the safety relief valve.

This manual is also suitable for:

Mih seriesMi series

Table of Contents