Removing The Battery Or Plug-In Module (User-Replaceable); Figure 2-1. Removing The Battery Or Module - HP OmniBook 7100 Service Manual

Removing the Battery or Plug-In Module
(User-Replaceable)
Required Equipment
• None.
Removal Procedure
1. Unplug the ac adapter, if present.
2. Turn the unit bottom side up.
3. Slide the latch open and pull out the module.
Reassembly Notes
• You can install a battery in either bay. But any other type of module must be installed in only the
left bay (on the right side when the unit is upside-down).
• For a battery, slide its faceplate to the left or right so it fits into the bay correctly.
HP OmniBook 7100

Figure 2-1. Removing the Battery or Module

Faceplate
Removal and Replacement 2-3