Making Calls From The Web Interface - Cisco C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Making calls from the web
interface
Sometimes, e.g. when you are configuring the
system from a remote location, it is convenient
to be able to make calls from the video system
to ensure everything works as expected.
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced configuration
The Call page
Password protection
13
Administrator guide
Appendices Contact us
How to make a call
Input field: Enter one or more characters in
the input field, until the name you want to
call appears in the dynamic search list or,
enter the complete name or number.
Dial: Press Dial to initiate the call.
Press Disconnect all to
Disconnect all:
end all calls.
Click Options to change the bit
Options:
rate for this call. Select the Call rate in the
drop down list.
The call status page
The call status page appear when you
make a call. Please allow for approximately
30 seconds after the call is up before
checking call details.
You will find the following information on
the call status page:
•
Remote number
•
Status: Connected
•
Direction: Incoming/Outgoing
•
Protocol: H323/SIP
•
Transmit and receive call rates
•
Encryption
•
Audio: Transmit and receive protocols
•
Video: Transmit and receive protocols
and resolutions
•
Presentation: Transmit and receive
protocols and resolutions
www.cisco.com