Playback Sound - JVC GR-DVL567 Instructions Manual

Playback Sound

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on pg. 50, select "SOUND MODE" or "12BIT MODE" from the Menu Screen and set it to the desired
parameter.
STEREO
SOUND MODE SOUND L
SOUND R
MIX
12BIT MODE
SOUND 1
SOUND 2
: Factory-preset
NOTES:
The "SOUND MODE" setting is available for both 12-bit and 16-bit sound. (In previous models' functions, "12-bit" is
called "32 kHz" and "16-bit" is called "48 kHz".)
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During
playback the sound mode is displayed in the upper left corner.
Display
ON SCREEN setting:
For playback sound, tape
speed and tape running.
1 2 B I T / SOUND1
L
Sound is output on both "L" and "R" channels in stereo.
Sound from the "L" channel is output in stereo.
Sound from the "R" channel is output in stereo.
Original and dubbed sounds are combined and output in stereo on both
"L" and "R" channels in stereo.
Original sound is output on both "L" and "R" channels in stereo.
Dubbed sound is output on both "L" and "R" channels in stereo.
DATE/TIME setting:
For date/time.
S P 4
6
TIME CODE setting:
For time code.
5 2 . 12 . 02
17 3 0 : 12 : 34 : 24
Frames*
Seconds
Minutes
*25 frames = 1 second
51
EN