Loading A Memory Card (Gr-Dvl867/Dvl865/Dvl767/ Dvl765/Dvl567/Dvl367/Dvl365 Only); Picture Quality/Image Size Setting (Gr-Dvl867/Dvl865/Dvl767/Dvl765/Dvl567/Dvl367/ Dvl365 Only) - JVC GR-DVL567 Instructions Manual

14
EN
Label
Memory card
Loading A Memory Card
(GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/
DVL365 only)
The provided memory card is already inserted in the
camcorder when you receive the camcorder.
1
Make sure the camcorder's power is off.
2
Press PUSH OPEN and open the LCD monitor,
then open the card cover (MEMORY CARD).
3
Insert the memory card clipped edge first.
• Do not touch the terminal on the reverse side of the
label.
4
To close the card cover, push it until you hear a
click.
To Unload A Memory Card . . .
..... in step 3 push the memory card, which then
comes out of the camcorder automatically. Pull it
out and close the card cover.
NOTES:
Be sure to use only SD Memory Cards marked
" " or MultiMediaCards marked
" ".
Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card ,
consult its manufacturer or dealer.
Before using a new memory card, it is necessary to
FORMAT the card.
ATTENTION
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the camcorder
to become unable to recognize whether or not the
card is installed.
Card Cover
Clipped edge
pg. 36.
GETTING STARTED
MENU/BRIGHT Wheel
Lock Button
Power Lamp
Picture Quality/Image Size Setting
(GR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/
DVL365 only)
The Picture Quality/Image Size can be selected to
best match your needs. Refer to the chart on page 27
for your selection.
1
Set the VIDEO/MEMORY Switch to "MEMORY",
then set the Power Switch to "
down the Lock Button located on the switch. The
power lamp lights and the camcorder turns on.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select
" DSC" and press it. The DSC Menu appears.
4
Rotate the MENU/BRIGHT wheel to select
"QUALITY" and press it. The Sub Menu appears.
Rotate the MENU/BRIGHT wheel to select the
desired mode and press it.
5
Rotate the MENU/BRIGHT wheel to select
"IMAGE SIZE" and press it. The Sub Menu appears.
Rotate the MENU/BRIGHT wheel to select the
desired mode and press it.
6
Rotate the MENU/BRIGHT wheel to select
" RETURN", and press it twice. The Menu Screen
closes.
(cont.)
Power Switch
Display
QUAL I TY – F I NE
I MAGE S I ZE – 1 02 4 X7 6 8
REC SELECT –
RETUR N
" while pressing