Volvo S60 Installation Instructions Manual page 10

Accessories - body kit

Hide thumbs Also See for S60:

Installation instructions, accessories - Body kit

Volvo Car Corporation Göteborg, Sweden

Install the new spoiler where the old lower section was positioned

Only press the spoiler into place in the hooks at the rear edge, not into the sides

yet.

M8401202

Fold down the edge on the lower section of the bumper cover and the brackets

in the bodywork for installing the spoiler, so that the clips can be pressed into

place

Take new clips from the kit. Press the spoiler mounting at the mounting brackets

in the car body into place

Repeat the operation on the other side.

M8401205

Press the spoiler ends on the right and left-hand sides into the corresponding

mountings in the car body

Now check that all the hooks on the spoiler have engaged.

M8401206

Fold the spoiler mounting bracket towards the spring clip. Tighten the spoiler

bracket to the mounting. Use a screw from the kit

Repeat the operation on the other side.

M8401204

30664734

Page 10 of 14